Audi A5 Coupe Rear Springs: Specs, Fitment & Common Faults
Confirmed directly in VW Group's own workshop documentation: the rear spring is a separate, distinct assembly from the shock absorber, even on the simpler torsion beam axle.
Illustration for editorial purposes
Opens live listings in a new tab.
A Separate Part From the Shock Absorber — Confirmed by VW Group's Own Documentation
Genuinely worth knowing on the Audi A5 Coupe: VW Group's own workshop manuals list the rear spring as a distinct removal and installation step from the shock absorber, with its own upper and lower spring seats — even on the simpler torsion beam rear axle. This means a spring can fail (sag, crack, or corrode through) independently of the shock absorber, and vice versa, so it's worth diagnosing which has actually failed before assuming both need replacing together.
Audi A5 Coupe Rear Springs: A Part That Fails Quietly, Then Suddenly
On the Audi A5 Coupe, the typical failure pattern here is gradual sag over months, barely noticeable beyond a marginally lower stance, followed by a sudden break at the coil's end with an audible clunk. If one rear corner appears to be sitting lower than the other, that's worth investigating.
Audi A5 Coupe Rear Springs: Watch: Replacing It
This video is of an earlier generation of the same model; the job is similar but the spring seats and fixings can differ slightly.
OEM Part Number: confirm via VIN — rear coil springs (aftermarket) Sachs 992277 / Suplex 03405
| Rear coil springs (aftermarket) | Sachs 992277 (standard, 270 mm); Suplex 03405 (standard, 270 mm); Eibach R22978 (standard, 265 mm); Ridex 188C3426 (electronic damping, 269 mm) |
|---|---|
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN |
| Torsion beam axle, standard rate | Confirm the colour-code marking on your existing spring before ordering — VW Group uses this to distinguish rate variants within the same axle type |
| Multi-link axle (higher-output/4Motion variants) | A genuinely different spring and spring seat design from the torsion beam version, reflecting the different axle architecture |
| Estate/higher-load body style, where applicable | Genuinely a stiffer rear spring rate than the equivalent standard body style, to handle the increased load-carrying capacity |
Fitting the Audi A5 Coupe's rear springs one at a time tends to backfire: pairing a fresh spring with a sagged original on the other side leaves the car sitting unevenly and biases handling to one side.
Audi A5 Coupe Rear Springs: What It Does
The Audi A5 Coupe's rear coil spring supports the weight of the car's rear end and absorbs the initial impact of a bump, working alongside the shock absorber (which controls the spring's rate of compression and rebound) rather than replacing its function. A sagged or broken spring lowers ride height, can affect headlight aim, and in severe cases is an MOT failure item.
Opens live listings in a new tab.
Audi A5 Coupe Rear Springs: Warning Signs, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.
More Audi Rear Springs
The same part, covered across other Audi models.