Car Parts Guide
REAR BUMPER Dacia Sandero (2020–) · PARTS GUIDE

Dacia Sandero Rear Bumper: Fitment, Sensors & Common Damage

A genuinely important safety warning: a real case saw a UK towbar loom mismatch cause the fog light to activate instead of reverse — plus a real camera activation cost.

Generation covered: this guide is for the third-generation Sandero (2020–present), with particular focus on 2020–2023 registered examples now old enough for parts to be a common search. Check your logbook or VIN if you're unsure which generation you have.
Illustration of a car bumper Illustration for editorial purposes
Find Dacia Sandero Rear Bumper Here!

Opens live listings in a new tab.

A Genuinely Important Safety Warning Worth Knowing Before Towbar Fitting

This is worth taking seriously if you're having a towbar wiring loom fitted: one documented case on a related model saw a fitter connect a 7-pin loom that had the reverse light and fog light functions genuinely swapped — selecting reverse caused the trailer's fog light to illuminate instead of the reverse light. The fitter suspected the loom itself was designed for a left-hand-drive market car despite being sold for a UK right-hand-drive vehicle. This is a genuine safety concern — a fog light activating unexpectedly when reversing could confuse other road users. It's worth specifically confirming any loom is genuinely UK-specification and having the fitter verify reverse and fog functions operate correctly before considering the job complete.

A genuine cost figure worth knowing if your car has factory reversing camera hardware: even once the physical camera has been fitted, it commonly requires activation through dealer-level diagnostic software before it will actually work — one documented case saw this activation step alone cost £108 for an hour's labour, separate from the camera and its installation.

It's also worth knowing that a fixed, bolt-on towball can genuinely trigger false parking sensor warnings on some cars, even without a trailer attached.

Dacia Sandero Rear Bumper: More Than Just a Plastic Panel

The Dacia Sandero's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Dacia Sandero Rear Bumper: Watch: Replacing It

🎬 Watch: Dacia Sandero III Stepway Demontage der Heckschürze (non-English)

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Dacia Sandero Rear Bumper reference plate

OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco DA2311051 / Diederichs 4457455

Accuracy note: Covers the Dacia Sandero (Mk3 2021 on) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Prasco DA2311051 (Rear, primed); Prasco DA2321091 (Rear, Colour: black, Grained, with holes for parking sensors, with holes for park assist); Prasco DA2321081 (Rear, Colour: black, for vehicles with parking sensors, Grained, with holes for park assist); Prasco DA2311091 (Rear, primed, with holes for parking sensors, with holes for park assist); Diederichs 4457455 (Rear, primed); Diederichs 4457055 (Rear, for vehicles without parking sensors, primed)
Lower sections, corners & trimsPrasco DA2321071 (Rear, Colour: black, for vehicles with parking sensors, for vehicles with park assist, Section: Lower Section); Prasco DA2311071 (Rear, for vehicles with parking sensors, for vehicles without park assist, Section: Lower Section, primed); Prasco DA2311081 (Rear, for vehicles with parking sensors, Section: Lower Section, primed, with holes for park assist)
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Stepway crossover versions use a genuinely different rear bumper design with additional cladding compared with the standard Sandero — these aren't interchangeable. Confirm your exact trim and whether the car has rear parking sensors before ordering.

Dacia Sandero Rear Bumper: What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the Sandero often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Dacia Sandero Rear Bumper: Generations & Colour

All generationsGlacier White (genuinely the most popular colour on this model — UK owner forum data shows it accounting for over half of orders), Pearl Black, Cinder Red, Sargasso Blue
Access base trimComes with unpainted black plastic bumpers rather than colour-coded ones — worth confirming which your car has before ordering, since a painted replacement won't match
Find Dacia Sandero Rear Bumper Here!

Opens live listings in a new tab.

Dacia Sandero Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Dacia Rear Bumper

The same part, covered across other Dacia models.