Fiat 500L Rear Springs: Specs, Fitment & Common Faults

Genuinely worth confirming first: drivetrain and left/right side both affect which rear spring fits.

Illustration for editorial purposes

Opens live listings in a new tab.

A Part That Fails Quietly, Then Suddenly

On the Fiat 500L, the typical failure pattern here is gradual sag over months, barely noticeable beyond a marginally lower stance, followed by a sudden break at the coil's end with an audible clunk. If one rear corner appears to be sitting lower than the other, that's worth investigating.

Before you buy: drivetrain, trim, and left/right side all affect spring rate and fitment. Always confirm against your VIN before ordering.

Fiat 500L Rear Springs: Watch: Replacing It

🎬 Watch: #fiat 500L INSPECTION AND COIL SPRING REPLACEMENT

Watch on YouTube ↗

OEM Part Number: confirm via VIN — rear coil springs (aftermarket) Monroe SP4208 / Suplex 09249

Accuracy note: Covers the Fiat 500L (2012-) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. genuinely worth knowing: rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.

Rear coil springs (aftermarket)	Monroe SP4208 (standard, 322 mm); Suplex 09249 (321 mm); Ashika ZCA7133A (319 mm); Japko ZCJ7133A (319 mm)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Front-wheel drive, standard rate	Genuinely a different spring from the AWD version below — confirm drivetrain and side before ordering
AWD	A genuinely different spring from the front-wheel-drive version, reflecting the different rear axle layout

Fitting the Fiat 500L's rear springs one at a time tends to backfire: pairing a fresh spring with a sagged original on the other side leaves the car sitting unevenly and biases handling to one side.

Fiat 500L Rear Springs: What It Does

The Fiat 500L's rear coil spring carries the weight of the car's back end and takes the first hit from any bump, working alongside — not instead of — the shock absorber. Once it sags or breaks, expect a lower ride height, possible headlight aim issues, and in severe cases, an MOT failure.

Find Fiat 500L Rear Springs Here!

Opens live listings in a new tab.

Fiat 500L Rear Springs: Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Fiat Rear Springs

The same part, covered across other Fiat models.