Ford C-Max Front Bumper: Fitment, Sensors & Common Damage

Water ingress behind the bumper is a well-documented Ford weak point for parking sensors — worth trying a simple clean first.

Illustration for editorial purposes

Find Ford C-Max Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Prasco FD7191001 / Van Wezel 1966574

Accuracy note: Covers the Ford C-Max (2010-2019) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Prasco FD7191001 (primed); Prasco FD7211001 (primed, with parking sensor holes, with headlamp washer holes); Van Wezel 1966574 (primed); Van Wezel 1968574 (primed, with fog light holes, with parking sensor holes, with headlamp washer holes, with tow eye cover hole); Diederichs 1467050 (primed)
Splitters, outer sections & trims	None listed separately
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

Parking Sensor Faults Often Come Down to Water Ingress, Not Failure

If your C-Max's parking sensors have stopped working — commonly showing as a constantly flashing button on the dash, or a beep that doesn't correspond to any real proximity warning — water getting into the sensors or the parking aid control module behind the bumper is a genuinely well-documented Ford weak point, not a rare or unusual fault. Before assuming the worst, it's worth trying the simple fix first: cleaning the sensors themselves and gently drying any moisture from around the bumper mounting points, since this alone resolves a meaningful share of these cases without any parts needing replacement.

Realistic cost expectations if it's genuinely a failed module: a specific fault code — B1299 (Power Supply Sensor Circuit Short To Ground) — has been documented on affected Fords, typically pointing to a failed parking aid control module rather than the sensors themselves. UK repair costs for parking sensor faults average in the £110-155 range according to national repair comparison data, though a full control module replacement can run higher — one documented case cost just over £300 once traced to the module specifically.

Ford C-Max Front Bumper: More Than Just a Plastic Panel

What seems like routine impact damage to the Ford C-Max's front bumper often isn't a simple fix, since it typically integrates parking sensors, adaptive cruise radar and fog light housings into the bumper itself — all of which need accounting for in the repair.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Ford C-Max Front Bumper: Watch: Replacing It

🎬 Watch: How To Remove/Replace Front End Ford Cmax 2015-2019

Watch on YouTube ↗

Ford C-Max Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the C-Max often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Ford C-Max Front Bumper: Generations & Colour

All generations	Frozen White, Moondust Silver, Fantastic Red, Silver Fox, Space White

Find Ford C-Max Front Bumper Here!

Opens live listings in a new tab.

Ford C-Max Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Ford Front Bumper

The same part, covered across other Ford models.