Hyundai Santa Fe Rear Bumper: Fitment, Sensors & Common Damage
On the Santa Fe, a documented case saw a towbar's reverse light circuit pass the dealer's own diagnostic test perfectly, yet still not work with the actual caravan.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — rear bumper (aftermarket) Blic 5506-00-3182954P / Equal Quality P5498
| Rear bumper covers (aftermarket) | Blic 5506-00-3182954P (Rear, from 09.2015, to 02.2018); Blic 5506-00-3182953P (Rear, from 09.2015, to 02.2018); Equal Quality P5498 (Rear, Colour: black); Equal Quality P5497 (Rear, primed) |
|---|---|
| Lower sections, corners & trims | Blic 5506-00-3182950P (Rear, Section: Upper section, from 09.2012); Blic 5506-00-3182951P (Rear, Colour: dark grey, Section: Lower Section, from 09.2012); Blic 5506-00-3182952P (Rear, Colour: dark grey, Section: Lower Section, with holes for park assist, from 09.2012) |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
A Genuinely Frustrating, Real Story Worth Knowing About Towbar Electrics — Hyundai Santa Fe Rear Bumper
If a dealer-fitted towbar's reverse light circuit isn't working with a caravan or trailer despite everything checking out, this is genuinely worth knowing: one documented case on a related model saw a dealer's own diagnostic equipment show the circuit working perfectly, yet the caravan's reverse lights still wouldn't illuminate when actually connected. Worth checking the physical pin voltages yourself: the pink pin on the 13-pin socket should show 12V when in reverse, with the white pin being the ground side.
It's also genuinely worth knowing that some Hyundai dealers have stopped offering towbar supply and fitting entirely, since Hyundai's own internal pricing can make the job commercially unviable for them — with real quotes from dealers still offering it running to £900 or more.
Hyundai Santa Fe Rear Bumper: More Than Just a Plastic Panel
It's rarely a plain plastic panel on the Hyundai Santa Fe: the rear bumper usually integrates parking sensors and a reversing camera housing, sometimes exhaust trim too, so a seemingly minor kerb scrape can end up needing more than a simple like-for-like swap.
Hyundai Santa Fe Rear Bumper: Watch: Replacing It
The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
Hyundai Santa Fe Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the Santa Fe often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Hyundai Santa Fe Rear Bumper: Generations & Colour
| Older generations | Creamy White, Typhoon Silver, Pebble Blue, Terracotta Orange |
|---|---|
| Current generation | Serenity White, Phantom Black, Rockwood Green, Atlantis Blue — Earthy Brass Matte is a distinctive matte finish option |
Opens live listings in a new tab.
Hyundai Santa Fe Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Hyundai Rear Bumper
The same part, covered across other Hyundai models.