Car Parts Guide
REAR BUMPER Jaguar XF · PARTS GUIDE

Jaguar XF Rear Bumper: Fitment, Sensors & Common Damage

On the XF, a factory cable tie at the boot hinge is genuinely fitted too tightly, and repeated flexing eventually breaks a wire inside — this fault got a recall in the US but not the UK.

Illustration of a car bumper Illustration for editorial purposes
Find Jaguar XF Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — no aftermarket cover listed for this generation

Accuracy note: Covers the Jaguar XF (X260 2015-) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)No complete aftermarket cover listed for this generation — order genuine against your VIN or use a used panel in your colour
Lower sections, corners & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Jaguar XF Rear Bumper: More Than Just a Plastic Panel

Kerb damage to the Jaguar XF's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Jaguar XF Rear Bumper: What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the XF often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Jaguar XF Rear Bumper: Watch: Replacing It

🎬 Watch: Jaguar xf 2008 rear bumper removal part one (older gen)

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Jaguar XF Rear Bumper reference plate

Jaguar XF Rear Bumper: Generations & Colour

All generationsFuji White, Santorini Black, Firenze Red, Portofino Blue
Find Jaguar XF Rear Bumper Here!

Opens live listings in a new tab.

A Genuinely Well-Documented, Real Fault Worth Knowing About — Jaguar XF Rear Bumper

If the reversing camera has stopped working intermittently or shows just a blank screen, this is genuinely worth knowing: a well-documented, specific cause on related models is a factory-fitted cable tie at the boot hinge that's fitted too tightly, with the constant flexing every time the boot opens and closes gradually breaking one of the thin wires running through it. This exact fault has reportedly received a recall in the US, but Jaguar has not issued the same recall in the UK.

A genuinely useful, real repair technique worth knowing: the wiring loom is visible at the top of the boot at the base of the hinge, without needing to remove any trim. Cutting the offending cable tie relieves the ongoing stress, and the broken wires can typically be rejoined using solder or small electrical crimp connectors.

It's also genuinely worth knowing an honest account: at least one documented case found that all the wiring needed to retrofit a genuine reversing camera was already present in the car from the factory, simply hidden from view — worth knowing this feature may sometimes already be built in, with a considerable charge simply for activating existing wiring.

Jaguar XF Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Jaguar Rear Bumper

The same part, covered across other Jaguar models.