Kia Ceed Rear Bumper: Fitment, Sensors & Common Damage

A genuinely honest, positive consumer story: one dealer dismissed a fogged reversing camera as wear and tear, but a second dealer honoured the full 7-year warranty for the identical fault — plus a confirmed 6V voltage fact and a money-saving DIY repair technique.

Illustration for editorial purposes

Find Kia Ceed Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco KI4361051 / Van Wezel 8568546

Accuracy note: Covers the Kia Ceed (2012-2018) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.

Rear bumper covers (aftermarket)	Prasco KI4361051 (Rear, Colour: black); Van Wezel 8568546 (Rear, for vehicles with or without parking sensors and park assist, primed, Smooth, with holes for licence plate light); Diederichs 6554155 (Rear, for vehicles without parking sensors, Smooth); Klokkerholm 3268951 (Rear, Smooth)
Lower sections, corners & trims	None listed separately
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notes	Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

A Genuinely Honest, Positive Consumer Story Worth Knowing — Kia Ceed Rear Bumper

This is genuinely worth knowing if a dealer dismisses a fogged or blurry reversing camera as simple wear and tear: one documented case saw exactly this response from one dealer, refusing replacement unless the camera failed completely — yet a different, second dealer for the same 2018 model honoured the full 7-year warranty for the identical fault without argument. If you're facing a similar dismissal, it's genuinely worth trying a different dealer before accepting that answer, and worth keeping a complete, up-to-date service history on hand, since this can genuinely help support a warranty claim for water ingress-related faults like this.

A genuinely important, confirmed technical fact worth knowing before fitting an aftermarket head unit: the factory reversing camera runs on 6V specifically, not the 12V that most aftermarket head units output by default — wiring the original camera directly into a 12V feed without a proper step-down module will genuinely destroy it. If you're keeping the factory camera while upgrading the head unit, it's essential to wire in a 12V-to-6V step-down module in between.

It's also genuinely worth knowing a genuinely money-saving DIY technique worth trying if the factory camera has failed: rather than buying a full genuine replacement unit, a cheap generic replacement camera, even one with the wrong connector, can often be dismantled so that just the camera module itself is swapped into the original factory housing — this lets you keep using the existing wiring and connector exactly as before, at a fraction of the cost of buying the complete genuine part.

Kia Ceed Rear Bumper: More Than Just a Plastic Panel

The Kia Ceed's rear bumper is rarely just a bumper — parking sensors, a reversing camera housing, and sometimes exhaust trim finishers are commonly built into it, so even minor kerb damage can turn a simple swap into a bigger job.

Kia Ceed Rear Bumper: Watch: Replacing It

🎬 Watch: How to remove the rear bumper on a Kia Pro Ceed

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Kia Ceed Rear Bumper: What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the Ceed often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Kia Ceed Rear Bumper: Generations, Derivatives & Colour

Standard trims	Clear White, Aurora Black, Gravity Blue, Infra Red
GT-Line/GT	The rear bumper is also styled differently on this trim

Find Kia Ceed Rear Bumper Here!

Opens live listings in a new tab.

Kia Ceed Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Kia Rear Bumper

The same part, covered across other Kia models.