Land Rover Defender Rear Bumper: Fitment, Sensors & Common Damage
A genuinely honest finding: the actual wire colours at the reverse light switch didn't match the official wiring diagram at all in one documented case — plus a genuine tip for mounting a retrofitted camera inside the tailgate to avoid constant lens cleaning.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — no aftermarket cover listed for this generation
| Rear bumper covers (aftermarket) | No complete aftermarket cover listed for this generation — order genuine against your VIN or use a used panel in your colour |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Land Rover Defender Rear Bumper: More Than Just a Plastic Panel
Kerb damage to the Land Rover Defender's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.
Land Rover Defender Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the Defender often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Land Rover Defender Rear Bumper: Watch: Replacing It
The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
Land Rover Defender Rear Bumper: Generations & Colour
| Current generation (2020–present) | Fuji White (no-cost solid), Pangea Green and Gondwana Stone (genuinely named after ancient supercontinents), Santorini Black, Tasman Blue — a Santorini Black contrast roof is available on Fuji White |
|---|
Opens live listings in a new tab.
A Genuinely Honest, Real Finding Worth Knowing About Wiring Diagrams — Land Rover Defender Rear Bumper
If you're tracing wiring for the reverse light circuit yourself, this is genuinely worth knowing: one documented case found the actual wire colours at the reverse light switch connector didn't match the official wiring diagram at all, with green and green/brown documented but black and black/white actually found in practice. It's genuinely worth testing with a multimeter to confirm which wire is actually live in reverse, rather than assuming the documented colours will match exactly what you find on your specific car.
It's also genuinely worth knowing that the camera unit itself is often just a "dumb" camera, with the on-screen grid lines and graphics generated by a separate module — if the image works but the grid lines are missing, this points toward the module rather than the camera unit itself.
Land Rover Defender Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Land Rover Rear Bumper
The same part, covered across other Land Rover models.