Land Rover Range Rover Evoque Rear Shock Absorber: Specs, Fitment & Common Faults

Confirmed by parts suppliers: Standard (Passive) and Adaptive Dynamics (electronic) rear shocks are not interchangeable, and accessing the rear shock's top mount involves more interior trim removal than you might expect.

Illustration of a rear shock absorber and coil spring

Illustration for editorial purposes

Find Land Rover Range Rover Evoque Rear Shock Absorber Here!

Opens live listings in a new tab.

Confirmed: Standard and Adaptive Dynamics Rear Shocks Are Not Interchangeable

Genuinely important to establish before ordering: this model offers two distinct rear suspension systems — a Standard (Passive) shock and an Adaptive Dynamics (electronic/MagneRide) shock. Fitment guides explicitly warn these are electronically and physically different and cannot be interchanged. Left and right are also separate, non-mirror-image parts.

A genuinely useful diagnostic tip: a knocking noise from the rear is sometimes caused by a worn control arm bushing rather than a genuinely failed shock — worth investigating this cheaper possibility first, consistent with a documented technical service bulletin covering a similar front-end symptom on this platform.

Land Rover Range Rover Evoque Rear Shock Absorber: The Part That Takes Every Bump Before You Feel It

It's easy to focus entirely on the Land Rover Range Rover Evoque's front suspension, since it also does the steering, but the rear shocks age just the same — often with subtler symptoms that get dismissed as road noise right up until they can't be ignored.

Before you buy: Standard vs Adaptive Dynamics, and left/right side both affect fitment. Always confirm against your VIN before ordering.

Land Rover Range Rover Evoque Rear Shock Absorber: Watch: Replacing It

🎬 Watch: Rear Shock Absorber Replacement Rang Rover Evoque

Watch on YouTube ↗

Land Rover Range Rover Evoque Rear Shock Absorber reference plate

OEM Part Number: confirm via VIN — rear shock absorbers (aftermarket) Monroe D0421L / Sachs 318315

Accuracy note: Covers the Land Rover Range Rover Evoque (L538 2011-2018) as listed in the UK aftermarket catalogues. Rear shock absorbers are replaced as a pair across the axle, because a new damper beside a worn one leaves the car feeling uneven. The right one depends on the engine, the suspension type (standard, sport or heavy-duty, and electronic damping on some models) and sometimes the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine damper against your VIN if you want a guaranteed fit. genuinely worth knowing: accessing the rear shock's top mounting bolts requires removing a significant amount of interior trim panels — factor this into labour time and cost estimates, since it's more involved than the equivalent front strut job.

Rear shock absorbers (aftermarket)	Monroe D0421L (left, gas, strut); Monroe D0420R (right, gas, strut); Sachs 318315 (left, gas, strut); Sachs 318316 (right, gas, strut)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine damper varies by engine, suspension type and body style, so order it against your VIN
Standard (Passive), right	Genuinely a different part number from the left-side shock, and from the Adaptive Dynamics version below — confirm both side and suspension type before ordering
Standard (Passive), left	A genuinely different reference from the right-side shock above
Adaptive Dynamics (electronic/MagneRide)	A genuinely different, electronically controlled shock from the standard passive version — fitment guides explicitly warn these are not interchangeable

Shock absorbers should always be replaced in pairs, and a full four-wheel alignment is recommended after replacement.

Land Rover Range Rover Evoque Rear Shock Absorber: What It Does

On the Land Rover Range Rover Evoque, controlling the speed of rear suspension compression and rebound over bumps is the shock absorber's job, working separately from the coil spring. A worn one means the back end bounces longer than it should after a bump.

Find Land Rover Range Rover Evoque Rear Shock Absorber Here!

Opens live listings in a new tab.

Land Rover Range Rover Evoque Rear Shock Absorber: Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Shock Absorber Guide for symptoms of a worn shock, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Land Rover Rear Shock Absorber

The same part, covered across other Land Rover models.