Car Parts Guide
REAR BUMPER Lexus NX · PARTS GUIDE

Lexus NX Rear Bumper: Fitment, Sensors & Common Damage

On the NX, disconnecting the camera making no difference to a black screen, but wiggling the wires causing interference, genuinely points to a wiring fault rather than the camera itself.

Illustration of a car bumper Illustration for editorial purposes
Find Lexus NX Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — rear bumper (aftermarket) Blic 5506-00-8166952P

Accuracy note: Covers the Lexus NX (2014-2021) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.
Rear bumper covers (aftermarket)Blic 5506-00-8166952P (Rear, from 07.2014, to 09.2017); Blic 5506-00-8166951Q (Rear, Colour: black, from 07.2014); Blic 5506-00-8166950P (Rear, from 07.2014); Blic 5506-00-8166951P (Rear, with holes for parking sensors, from 01.2018, to 12.2020)
Lower sections, corners & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notesMatch body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

Lexus NX Rear Bumper: More Than Just a Plastic Panel

It's rarely a plain plastic panel on the Lexus NX: the rear bumper usually integrates parking sensors and a reversing camera housing, sometimes exhaust trim too, so a seemingly minor kerb scrape can end up needing more than a simple like-for-like swap.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Lexus NX Rear Bumper: What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the NX often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Lexus NX Rear Bumper: Watch: Replacing It

🎬 Watch: How to remove your 2015-2017 Lexus NX200T Rear bumper cover

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Lexus NX Rear Bumper reference plate

Lexus NX Rear Bumper: Generations, Derivatives & Colour

Standard trimsEminent White, Atomic Silver, Nebula Grey, Caviar Mica
F SportUltra White and Ultrasonic Blue Mica 2.0 are genuinely exclusive to F Sport, not available on other trims; the rear bumper is also styled differently on this trim
Find Lexus NX Rear Bumper Here!

Opens live listings in a new tab.

A Genuinely Useful Piece of Context Worth Knowing About Reversing Camera Diagnosis — Lexus NX Rear Bumper

If the reversing camera screen has gone completely dark, this is genuinely worth knowing: documented cases on related Lexus models describe disconnecting the camera making no difference to a black screen, yet wiggling the wiring sometimes causing interference to appear — pointing toward a wiring fault rather than the camera itself.

A genuinely useful diagnostic distinction worth knowing: if the camera image displays correctly but the coloured guide lines overlay is missing, this points toward a different kind of fault, likely software or calibration related, rather than wiring.

It's also worth knowing that retrofitting a genuine OEM reversing camera to a car that didn't come with one can be more involved than simply plugging in a camera.

Lexus NX Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Lexus Rear Bumper

The same part, covered across other Lexus models.