Renault Twingo Rear Springs: Specs, Fitment & Common Faults

Genuinely worth confirming first: drivetrain and left/right side both affect which rear spring fits.

Illustration for editorial purposes

Opens live listings in a new tab.

A Part That Fails Quietly, Then Suddenly

Months of gradual sagging with barely any symptom beyond a marginally lower ride height is the usual pattern for the Renault Twingo's rear spring, right up until it fails suddenly at the coil's end with a clunk. If one rear corner looks lower than the other, that's the clue worth acting on.

Before you buy: drivetrain, trim, and left/right side all affect spring rate and fitment. Always confirm against your VIN before ordering.

Renault Twingo Rear Springs: Watch: Replacing It

🎬 Watch: How to change rear springs / rear coil springs on RENAULT TWINGO 1 (C06) [TUTORIAL AUTODOC]

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the spring seats and fixings can differ slightly.

Renault Twingo Rear Springs reference plate

OEM Part Number: confirm via VIN — rear coil springs (aftermarket) Monroe SP4383 / Sachs 994951

Accuracy note: Covers the Renault Twingo (Mk3 2014-) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. genuinely worth knowing: rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.

Rear coil springs (aftermarket)	Monroe SP4383 (269 mm); Monroe SP4384 (255 mm); Monroe SP4379 (268 mm); Sachs 994951 (standard, 268 mm)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Front-wheel drive, standard rate	Genuinely a different spring from the AWD version below — confirm drivetrain and side before ordering
AWD	A genuinely different spring from the front-wheel-drive version, reflecting the different rear axle layout

Replacing just one Renault Twingo rear spring is a false economy: pairing it with an old, sagged spring on the other side produces uneven ride height and a noticeable handling bias.

Renault Twingo Rear Springs: What It Does

The Renault Twingo's rear end weight rests on the coil spring, which also absorbs the initial shock of a bump — a separate function from the shock absorber, not a replacement for it. Left sagged or broken, it lowers ride height, potentially skews headlight aim, and can become an MOT failure in severe cases.

Find Renault Twingo Rear Springs Here!

Opens live listings in a new tab.

Renault Twingo Rear Springs: Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Renault Rear Springs

The same part, covered across other Renault models.