Suzuki Celerio Rear Springs: Specs, Fitment & Common Faults

Genuinely worth confirming first: drivetrain and left/right side both affect which rear spring fits.

Illustration for editorial purposes

Opens live listings in a new tab.

A Part That Fails Quietly, Then Suddenly

A sagging Suzuki Celerio rear spring rarely gives dramatic warning — just a slightly reduced ride height over several months — before eventually failing suddenly at the coil's end with an audible clunk. Keep an eye out for one rear corner sitting lower than the other as an early tell.

Before you buy: drivetrain, trim, and left/right side all affect spring rate and fitment. Always confirm against your VIN before ordering.

Suzuki Celerio Rear Springs: Watch: Replacing It

🎬 Watch: Suzuki Celerio Gen 2 Rear Shock Replacement

Watch on YouTube ↗

This video is of an earlier generation of the same model; the job is similar but the spring seats and fixings can differ slightly.

Suzuki Celerio Rear Springs reference plate

OEM Part Number: confirm via VIN — rear coil springs (aftermarket) Monroe SP4975 / KYB K-Flex RA5502

Accuracy note: Covers the Suzuki Celerio (2015-) as listed in the UK aftermarket catalogues. Rear coil springs are sold as a pair for the axle and should be replaced as a pair, because a new spring beside a tired one leaves the car sitting unevenly. The right spring depends on the engine and gearbox, the suspension type (standard, sport or heavy-duty) and, on some cars, the body style. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so match a genuine spring against your VIN if you want a guaranteed fit. genuinely worth knowing: rear springs are sold in left/right pairs matched to a specific rate marking — confirm the marking on your existing spring rather than assuming from trim alone.

Rear coil springs (aftermarket)	Monroe SP4975 (265 mm); KYB K-Flex RA5502 (260 mm); Lesjöfors 4288934; Triscan 87506970
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine spring varies by engine, suspension type and body style, so order it against your VIN
Front-wheel drive, standard rate	Genuinely a different spring from the AWD version below — confirm drivetrain and side before ordering
AWD	A genuinely different spring from the front-wheel-drive version, reflecting the different rear axle layout

A single new rear spring on the Suzuki Celerio, next to an old, sagged one, creates an imbalance — uneven ride height and a handling bias — which is why replacing them as a pair is the better approach.

Suzuki Celerio Rear Springs: What It Does

On the Suzuki Celerio, bearing the rear end's weight and cushioning the initial jolt of a bump is the coil spring's role, complementing the shock absorber rather than duplicating its job. When it sags or breaks, ride height drops, headlight aim can be thrown off, and severe cases can mean an MOT failure.

Find Suzuki Celerio Rear Springs Here!

Opens live listings in a new tab.

Suzuki Celerio Rear Springs: Warning Signs, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Springs Guide for symptoms of a failing spring, confirming fitment against your VIN, and OEM vs aftermarket guidance.

More Suzuki Rear Springs

The same part, covered across other Suzuki models.