Suzuki Swift Rear Bumper: Fitment, Sensors & Common Damage
On the Swift, a reversing camera fault on a related model present from day one genuinely caused a complete infotainment failure, traced to a rubbed-through, shorting cable.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco SZ0391051 / Van Wezel 5226544
| Rear bumper covers (aftermarket) | Prasco SZ0391051 (Rear, primed); Van Wezel 5226544 (Rear, primed); Diederichs 6416055 (Rear, for vehicles without parking sensors, primed); Blic 5506-00-6816950Q (Rear); Jumasa 25404639 (Rear, primed) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
Suzuki Swift Rear Bumper: More Than Just a Plastic Panel
It's rarely a plain plastic panel on the Suzuki Swift: the rear bumper usually integrates parking sensors and a reversing camera housing, sometimes exhaust trim too, so a seemingly minor kerb scrape can end up needing more than a simple like-for-like swap.
Suzuki Swift Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the Swift often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Suzuki Swift Rear Bumper: Watch: Replacing It
The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
Suzuki Swift Rear Bumper: Generations, Derivatives & Colour
| Standard trims | Pure White Pearl, Super Black, Frontier Blue, Mineral Grey |
|---|---|
| Swift Sport | Burning Red and Flame Orange are popular Sport-associated shades; the rear bumper is also styled differently on this trim |
Opens live listings in a new tab.
A Genuinely Significant, Real Account Worth Knowing About — Suzuki Swift Rear Bumper
If your reversing camera has an intermittent fault a dealer can't pin down, this is genuinely worth knowing: one documented case on a related Suzuki model saw a camera fault present from the very first day of ownership, initially undiagnosed, before the entire infotainment system failed completely around 18 months later — eventually traced to a single incorrectly installed cable at the camera mounting that had rubbed through and was intermittently shorting.
It's also genuinely worth knowing that whether a towbar wiring kit needs the car's systems reprogrammed varies by supplier — some recommend it, while others state clearly that no recoding or activation is needed for their specific wiring loom, worth checking the specific kit's documentation rather than assuming either way.
Suzuki Swift Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Suzuki Rear Bumper
The same part, covered across other Suzuki models.