Toyota Yaris Rear Bumper: Fitment, Sensors & Common Damage
On the Yaris, the factory reversing camera genuinely runs on 6V, not 12V — worth knowing before any aftermarket stereo work.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco TY3301051 / Van Wezel 5344540
| Rear bumper covers (aftermarket) | Prasco TY3301051 (Rear, Colour: black, Smooth); Prasco TY3281051 (Rear, Colour: black); Prasco TY3301061 (Rear, primed); Van Wezel 5344540 (Rear, Colour: black, Smooth, for facelift); Van Wezel 5437540 (Rear); Van Wezel 5428540 (Rear, Colour: black, for vehicles with parking sensors, for vehicles without parking sensors, Smooth, for facelift) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
A Genuinely Specific, Real Fact Worth Knowing Before Any Aftermarket Head Unit Work — Toyota Yaris Rear Bumper
If you're fitting an aftermarket stereo and trying to keep the factory reversing camera working, this is genuinely worth knowing: the factory camera runs on 6V specifically, not the standard 12V most generic wiring guides assume. One documented case on a related model saw a camera stay permanently on regardless of gear selected, only resolved once a proper 12V-to-6V step-down converter was correctly fitted.
It's also worth knowing that towbar wiring kits can be genuinely confusing to match against factory wiring colours, since generic kit instructions rarely specify which factory wire colour corresponds to which function on your specific car.
Toyota Yaris Rear Bumper: More Than Just a Plastic Panel
The Toyota Yaris's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.
Toyota Yaris Rear Bumper: Watch: Replacing It
The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
Toyota Yaris Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the Yaris often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Toyota Yaris Rear Bumper: Generations, Derivatives & Colour
| Standard Yaris (2020–present), all trims | Pure White, Decuma Grey, Eclipse Black, Nebula Blue, Scarlet Flare |
|---|---|
| GR Yaris (2020–present) | Deliberately limited to just four shades: Pure White, Precious Black, Scarlet Flare, and Platinum White Pearl — genuinely narrower than the standard range; the rear bumper is also styled differently on this trim |
Opens live listings in a new tab.
Toyota Yaris Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Toyota Rear Bumper
The same part, covered across other Toyota models.