Car Parts Guide
FRONT BUMPER Volvo XC90 · PARTS GUIDE

Volvo XC90 Front Bumper: Fitment, Sensors & Common Damage

On the XC90, replacing three parking sensors yourself genuinely costs under £60 — plus an alarming finding where a dealer quoted four hours' labour that the official procedure says isn't needed.

Illustration of a car bumper Illustration for editorial purposes
Find Volvo XC90 Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Van Wezel 5999575 / Blic 5510-00-9061901P

Accuracy note: Covers the Volvo XC90 (2015-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.
Front bumper covers (aftermarket)Van Wezel 5999575 (primed, with parking sensor holes); Blic 5510-00-9061901P (with headlamp washer holes, from 09.2014); Blic 5510-00-9061902P (with headlamp washer holes, from 09.2014); Blic 5510-00-9061900P (from 09.2014)
Splitters, outer sections & trimsNone listed separately
Genuine (OE) numbers quotedNone quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notesMatch body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

Volvo XC90 Front Bumper: More Than Just a Plastic Panel

The Volvo XC90's front bumper doubles as a sensor housing — parking sensors, adaptive cruise radar, and fog lights are all commonly built in — which is why even minor impact damage can turn a straightforward-looking swap into a bigger job.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Volvo XC90 Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the XC90 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Volvo XC90 Front Bumper: Watch: Replacing It

🎬 Watch: Volvo XC90 (SPA) Headlamp Washer Cover Part 3 (Front Bumper Removal)

Watch on YouTube ↗
Volvo XC90 Front Bumper reference plate

Volvo XC90 Front Bumper: Generations, Derivatives & Colour

Momentum/InscriptionCrystal White, Denim Blue, Thunder Grey, Onyx Black
Inscription-exclusivePebble Grey and Birch Light are genuinely restricted to this top trim, not available on Momentum or Plus
Find Volvo XC90 Front Bumper Here!

Opens live listings in a new tab.

A Genuinely Money-Saving, Real Account Worth Knowing — Volvo XC90 Front Bumper

If a parking sensor fault is quoted at a significant labour cost, this is genuinely worth knowing: one documented UK case saw an owner replace three sensors themselves for under £60 in total, using a special nylon tool to ease the bumper away from the bodywork without scratching the paint. The sensors themselves typically cost around £20 each — it's the dealer's labour charge specifically that tends to make this job feel expensive.

A genuinely alarming, honest finding worth knowing before accepting a labour quote: one documented case saw a dealer quote four hours of labour to replace a single sensor, claiming the bumper and wiring harness needed to be removed — yet according to the official repair procedure for this exact job, the bumper does not need to come off at all.

It's also genuinely worth knowing a useful diagnostic technique: with the ignition on and the car in reverse, a healthy sensor should emit a faint, rapid clicking sound as it sends out ultrasonic pulses. A silent sensor is likely the genuine source of a fault.

Volvo XC90 Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Volvo Front Bumper

The same part, covered across other Volvo models.