Volkswagen Sharan Engine Mount: Specs, Fitment & Common Faults
A genuine, simple test on the Sharan tells apart a worn engine mount from an expensive DSG fault — worth trying before assuming the transmission is at fault.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — engine mount (aftermarket) Febi 22762 / Corteco 80001310
| Engine Mount — Upper (aftermarket) | Tedgum 00728393, Original Imperium 32424 |
|---|---|
| Engine Mount — Lower (aftermarket) | Tedgum 00728427, Febi 22762 |
| Engine Mount — Rear (aftermarket) | Febest VWAB-034, Corteco 80001310 |
| Genuine (OE) number | Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN |
| Fitment notes | The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount. |
A Genuine Test That Separates a Worn Mount From an Expensive DSG Fault — Volkswagen Sharan Engine Mount
If you're hearing a clunk or jolt on DSG-equipped models, particularly on gear changes or when shifting between drive and reverse, it's genuinely worth confirming whether this is a worn engine mount (specifically the "dogbone" torque mount, cheap to replace) before assuming a much more expensive DSG mechatronics fault. A simple, well-corroborated self-test: on level ground, come to a complete stop, then switch from drive into reverse (or vice versa) and pull away gently. A pronounced clunk or jolt specifically at this moment of engaging the opposite direction points strongly toward a worn torque mount rather than the gearbox itself — the engine has slightly more room to rock against a worn mount before the drivetrain engages smoothly in the new direction.
Volkswagen Sharan Engine Mount: Watch: Replacing It
This video is of an earlier generation of the same model; the job is similar but the mount positions and fixings can differ slightly.
Volkswagen Sharan Engine Mount: What It Does
Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Sharan use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.
Opens live listings in a new tab.
Volkswagen Sharan Engine Mount: Symptoms, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some genuinely make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.
More Volkswagen Engine Mount
The same part, covered across other Volkswagen models.