Citroen C1 Rear Bumper: Fitment, Sensors & Common Damage

On the C1, a genuinely simple, free camera fix: oxidised connector pins, resolved just by disconnecting and reconnecting — plus a real cost-saving towbar tip.

Illustration for editorial purposes

Find Citroen C1 Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco CI2061051 / Van Wezel 0919544

Accuracy note: Covers the Citroen C1 (2014-) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.

Rear bumper covers (aftermarket)	Prasco CI2061051 (Rear, primed); Van Wezel 0919544 (Rear, primed); Diederichs 4082055 (Rear, primed); Blic 5506-00-0502950P (Rear, from 04.2014)
Lower sections, corners & trims	None listed separately
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notes	Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

A Genuinely Simple, Free Fix Worth Trying: Oxidised Connector Pins — Citroen C1 Rear Bumper

If your reversing camera works intermittently or shows no picture at all, this is genuinely worth trying before assuming a wiring or camera fault: the connector behind the camera can develop a thin layer of oxidisation on its pins simply from ordinary ambient moisture over time. Disconnecting the connector and reconnecting it firmly is often enough to clean the pins through simple contact friction and restore a reliable connection, resolving the fault entirely without needing any parts replaced.

A genuinely useful, real cost-saving tip if you're fitting a towbar: a fixed swan-neck towbar can genuinely be fitted without removing the rear bumper at all on some models — one documented owner fitted their own towbar this way for around €112, considerably cheaper than the detachable towbar option, which typically carries a premium of £100 or more. If budget is the deciding factor, it's worth asking specifically whether bumper removal is genuinely required for your specific model.

It's also worth knowing that the trailer control module does more than provide power to the socket — it interfaces with the car's stability system to disable rear parking sensors and apply a specific towing driving programme when a trailer is detected. This is a genuine reason to insist on a proper wiring kit rather than a basic splice.

Citroen C1 Rear Bumper: More Than Just a Plastic Panel

The Citroen C1's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.

Citroen C1 Rear Bumper: Watch: Replacing It

🎬 Watch: Citroen C1 rear bumper removal

Watch on YouTube ↗

The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Citroen C1 Rear Bumper: What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the C1 often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Citroen C1 Rear Bumper: Generations & Colour

All generations	Polar White, Panther Black, Iron Grey, Sunburst Orange

Find Citroen C1 Rear Bumper Here!

Opens live listings in a new tab.

Citroen C1 Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Citroen Rear Bumper

The same part, covered across other Citroen models.