Fiat 500 (Petrol) Front Bumper: Fitment, Sensors & Common Damage

On the classic petrol 500, parking sensor wiring genuinely uses the same cable type known to cause issues elsewhere on this platform.

Generation covered: this guide is for the classic petrol/hybrid 500 (2007–2024) — not the fully electric 500e (2020–present), which is a completely different car sharing no mechanical parts despite the similar styling. Check your logbook or VIN, or confirm whether your car has an engine or an electric motor, if you're unsure which one you have.

Illustration for editorial purposes

Find Fiat 500 (Petrol) Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Prasco FT0301011 / Van Wezel 1604576

Accuracy note: Covers the Fiat 500 (Petrol) (2007- petrol 500) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Prasco FT0301011 (primed); Prasco FT0301031 (primed); Prasco FT0331001 (primed, S trim); Prasco FT0311001 (primed); Van Wezel 1604576 (primed)
Splitters, outer sections & trims	Diederichs 3405950; Diederichs 3405951 (facelift)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A Genuinely Useful Technical Connection Worth Knowing About the Wiring — Fiat 500 (Petrol) Front Bumper

If you're facing a "parking sensors unavailable" message, this is genuinely worth knowing: the wiring used for parking sensors has been documented as using the same type of cable known to cause issues elsewhere on this platform, where the insulation can break down and cause a short circuit, or the wire can short directly against the body if the rubber grommet protecting it becomes damaged.

A genuinely important consumer point worth knowing before authorising expensive parts replacement: one documented case saw a dealer quote replacing both the body computer and the Parktronic control unit, stating they couldn't guarantee the cheaper unit would work unless the more expensive one was also replaced — despite the owner suspecting a simple earth wire issue instead.

It's also genuinely worth knowing a simple, real fix confirmed by a dealer service manager: wax or dirt filling the small gaps on the sensor faces can cause the entire system to stop working, since the sensors rely on inaudible sound waves.

Fiat 500 (Petrol) Front Bumper: Watch: Replacing It

🎬 Watch: Front Bumper Cover Removal and Replacement on FIAT 500 2008 - 2016

Watch on YouTube ↗

Fiat 500 (Petrol) Front Bumper reference plate

Fiat 500 (Petrol) Front Bumper: More Than Just a Plastic Panel

There's more hidden in the Fiat 500 (Petrol)'s front bumper than most people expect: parking sensors, adaptive cruise control radar, and fog light housings are all routinely integrated, complicating what would otherwise be a simple replacement after minor impact damage.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Fiat 500 (Petrol) Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the 500 (Petrol) often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Fiat 500 (Petrol) Front Bumper: Generations & Colour

All generations	Bossa Nova White (the only no-cost colour, and the only solid white — a genuinely creamy off-white, not the crisp white some buyers expect), Pasodoble Red, Rock 'n' Roll Blue, Funk White (a pearlescent, different white to Bossa Nova)
Colour-matching note	Bossa Nova White has documented, genuine colour-matching difficulty after a respray — owner forum accounts describe bumpers coming back a visibly different shade even from official Fiat-supplied paint, so confirm your exact paint code (268 or 268/A) via VIN before ordering

Find Fiat 500 (Petrol) Front Bumper Here!

Opens live listings in a new tab.

Fiat 500 (Petrol) Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Fiat Front Bumper

The same part, covered across other Fiat models.