Fiat 500X Front Bumper: Fitment, Sensors & Common Damage

On the 500X, parking sensor wiring genuinely uses the same cable type known to cause issues elsewhere on this platform.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Prasco FT0601001 / Van Wezel 1618575

Accuracy note: Covers the Fiat 500X (2015-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Prasco FT0601001 (primed, City Look trim); Van Wezel 1618575 (primed, with parking sensor holes); Van Wezel 1618574 (primed); Van Wezel 1704574 (primed); Diederichs 3425850 (primed)
Splitters, outer sections & trims	Van Wezel 1618576 (primed, upper section, Cross trim); Van Wezel 1618577 (primed, with parking sensor holes, upper section, Cross trim)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A Genuinely Useful Technical Connection Worth Knowing About the Wiring — Fiat 500X Front Bumper

If you're facing a "parking sensors unavailable" message, this is genuinely worth knowing: the wiring used for parking sensors has been documented as using the same type of cable known to cause issues elsewhere on this platform, where the insulation can break down and cause a short circuit, or the wire can short directly against the body if the rubber grommet protecting it becomes damaged.

A genuinely important consumer point worth knowing before authorising expensive parts replacement: one documented case saw a dealer quote replacing both the body computer and the Parktronic control unit, stating they couldn't guarantee the cheaper unit would work unless the more expensive one was also replaced — despite the owner suspecting a simple earth wire issue instead.

It's also genuinely worth knowing a simple, real fix confirmed by a dealer service manager: wax or dirt filling the small gaps on the sensor faces can cause the entire system to stop working, since the sensors rely on inaudible sound waves.

Fiat 500X Front Bumper: More Than Just a Plastic Panel

There's more hidden in the Fiat 500X's front bumper than most people expect: parking sensors, adaptive cruise control radar, and fog light housings are all routinely integrated, complicating what would otherwise be a simple replacement after minor impact damage.

Fiat 500X Front Bumper: Watch: Replacing It

🎬 Watch: HOW TO: Remove + Install Front Bumper (Fiat 500)

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the clips and fixings can differ slightly on yours.

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Fiat 500X Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the 500X often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Fiat 500X Front Bumper: Generations & Colour

Standard trims	Bossa Nova White, Rock 'n' Roll Blue, Colosseum Grey, Passion Red
Connect trim	Body-coloured door mirrors and 17-inch alloys distinguish this trim from lower grades

Find Fiat 500X Front Bumper Here!

Opens live listings in a new tab.

Fiat 500X Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Fiat Front Bumper

The same part, covered across other Fiat models.