Ford C-Max Rear Bumper: Fitment, Sensors & Common Damage
A non-working reversing camera is often a fuse or loose connector, not a genuine failure — worth checking these first.
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — rear bumper (aftermarket) Van Wezel 1966544 / Diederichs 1467055
| Rear bumper covers (aftermarket) | Van Wezel 1966544 (Rear, for vehicles with parking sensors, for vehicles without parking sensors, primed); Diederichs 1467055 (Rear, for vehicles without parking sensors, primed); Blic 5506-00-2535950Q (Rear, from 12.2010); Klokkerholm 2535950 (Rear, primed, with holes for trim/protective strip); Jumasa 25401566 (Rear, primed) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
A Reversing Camera Fault Often Has a Simple, Cheap Cause
If your Ford C-Max's reversing camera has stopped displaying an image when you select reverse, it's genuinely worth working through the simple, common causes before assuming the camera itself has failed. Start with the dedicated fuse for the camera circuit — a blown fuse is a straightforward, inexpensive fix. Next, check that the reverse light switch is functioning correctly, since many camera systems are wired to activate directly from the reverse light circuit; if the reverse lights themselves aren't illuminating, that's your actual starting point rather than the camera. Finally, inspect the wiring harness and connectors near the tailgate for damage or a connection that's come loose — this area sees repeated flexing every time the tailgate opens and closes, and a connector working itself loose over time is a genuinely common, simple cause.
Ford C-Max Rear Bumper: More Than Just a Plastic Panel
The Ford C-Max's rear bumper is rarely just a bumper — parking sensors, a reversing camera housing, and sometimes exhaust trim finishers are commonly built into it, so even minor kerb damage can turn a simple swap into a bigger job.
Ford C-Max Rear Bumper: Watch: Replacing It
2015 C-Max, English
Ford C-Max Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the C-Max often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Ford C-Max Rear Bumper: Generations & Colour
| All generations | Frozen White, Moondust Silver, Fantastic Red, Silver Fox, Space White |
|---|
Opens live listings in a new tab.
Ford C-Max Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Ford Rear Bumper
The same part, covered across other Ford models.