Mitsubishi ASX Engine Mount: Specs, Fitment & Common Faults

On the ASX, a garage on a related model genuinely quoted £600 for a mount part that's actually available for under £24.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — engine mount (aftermarket) Febi 104183 / Febest MM-CYFR

Accuracy note: Covers the Mitsubishi ASX (2010-) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.

Engine Mount — Front (aftermarket)	Kavo EEM-5506, Febest MM-CYFR
Engine Mount — Rear (aftermarket)	Kavo EEM-5505, Febi 104183
Engine Mount — Right front (aftermarket)	Original Imperium 610288, Febest MM-CYRH
Genuine (OE) number	Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notes	The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

Mitsubishi ASX Engine Mount: What It Does

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the ASX use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Mitsubishi ASX Engine Mount: Watch: Replacing It

🎬 Watch: How to Replace Front Lower Engine Mount 2008-2017 Mitsubishi Lancer

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.

Mitsubishi ASX Engine Mount reference plate

Find Mitsubishi ASX Engine Mount Here!

Opens live listings in a new tab.

A Genuinely Alarming, Real Pricing Discrepancy Worth Knowing About — Mitsubishi ASX Engine Mount

This is genuinely worth knowing before agreeing to an expensive quote for a mount-related clunk: one documented case on a related Mitsubishi model saw a garage quote £600 for what they described as a "differential mounting" part — but the actual replacement bush needed was available from an aftermarket brand for under £24 including delivery, or as a genuine Mitsubishi part for somewhere between £50 and £100. It's genuinely worth getting a second quote if you're facing a similarly high price for what sounds like this specific job.

A genuinely useful DIY tip worth knowing: take a photo of the original mount bush before removing it from its bracket, since the orientation of the bush matters for correct reinstallation.

It's also genuinely worth knowing a useful diagnostic distinction: a clunk specifically when moving off typically points toward a worn engine or motor mount, but a separate vibration that only appears at higher speed can have an entirely unrelated cause, such as binding brake calipers — worth not assuming every noise or vibration issue shares the same root cause.

Mitsubishi ASX Engine Mount: Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some genuinely make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

More Mitsubishi Engine Mount

The same part, covered across other Mitsubishi models.