Nissan X-Trail Engine Mount: Specs, Fitment & Common Faults

On the X-Trail, a genuinely useful, free diagnostic technique checks for a worn mount by hand.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — engine mount (aftermarket) Febi 184155 / Swag 33109287

Accuracy note: Covers the Nissan X-Trail (T32 2014-) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.

Engine Mount — Lower (aftermarket)	Febi 184155, Swag 33109287
Engine Mount — Right (aftermarket)	Febi 1006980, Swag 33115281
Engine Mount — Other mounts (position not stated) (aftermarket)	Original Imperium 32795, Sasic 2704139
Genuine (OE) number	Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notes	The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

A Genuinely Useful, Free Diagnostic Technique Worth Trying — Nissan X-Trail Engine Mount

With the engine off and appropriate care taken, you can often physically check for excessive play by attempting to move the engine by hand at accessible points — genuine, noticeable movement beyond a small amount of expected give indicates a worn mount. One documented case on a related model found the top mount had degraded to the point the engine could be moved by hand quite easily, confirming the diagnosis directly.

Genuinely worth knowing before assuming one repair fixes everything: different mounts can cause distinctly different symptoms, and fixing one doesn't necessarily fix all. One documented case replaced the top mount, which resolved vibration at idle completely, but a separate clunk specifically on and off the throttle persisted afterward, eventually traced to a completely different, badly worn gearbox mount that needed replacing separately.

It's also worth knowing that a genuine on/off-throttle "thump" or sudden takeup, distinct from a smooth judder, has been linked to a worn engine steady bar (torque strut) specifically — a component that controls engine rock under load and is worth checking alongside the more obvious mounts if this specific symptom pattern matches what you're experiencing.

Nissan X-Trail Engine Mount: Watch: Replacing It

🎬 Watch: Nissan Rogue How To Replace Engine Mount & Torque Mount 2014 2015 2016 2nd Gen (T32)

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.

Nissan X-Trail Engine Mount reference plate

Nissan X-Trail Engine Mount: What It Does

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the X-Trail use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Find Nissan X-Trail Engine Mount Here!

Opens live listings in a new tab.

Nissan X-Trail Engine Mount: Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some genuinely make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

More Nissan Engine Mount

The same part, covered across other Nissan models.