Peugeot 108 Front Bumper: Fitment, Sensors & Common Damage

On the 108, the whole parking sensor system can fail from either one damaged sensor or a damp-prone control module — plus a free click-test to diagnose which.

Illustration for editorial purposes

Find Peugeot 108 Front Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Van Wezel 4022574 / Diederichs 4212050

Accuracy note: Covers the Peugeot 108 (2014-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Van Wezel 4022574 (primed); Diederichs 4212050 (primed); Blic 5510-00-5504900P (from 05.2014); Klokkerholm 5500900 (primed)
Splitters, outer sections & trims	None listed separately
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A Genuinely Important Fact: The Whole System Can Fail From One Sensor, or the Module Itself — Peugeot 108 Front Bumper

If your entire parking sensor system has stopped working at once — front and rear together, not just one specific sensor — this is genuinely worth knowing: on this platform, if just one individual sensor fails internally, the parking assistance ECU can disable the entire system rather than just losing detection at that one point. Separately, and worth checking directly, the parking assistance ECU module itself (located in the left-hand inner compartment of the boot area) is genuinely prone to failing from damp and water ingress affecting the module directly, rather than any individual sensor being at fault at all. If you're chasing a total system failure, it's worth checking both possibilities rather than assuming it must be one specific sensor.

A genuinely useful, free diagnostic test worth trying first: with the parking sensors switched on, place your ear close to each sensor in turn — a healthy sensor produces an audible clicking sound as it pulses. A sensor that stays silent while the others click confirms which specific one has failed, letting you narrow down the problem before paying for diagnostics. One documented owner used proper Peugeot diagnostic software to correctly identify a single faulty rear sensor this way, then sourced a genuine replacement for around £65 rather than guessing and replacing several sensors unnecessarily.

Peugeot 108 Front Bumper: More Than Just a Plastic Panel

There's more hidden in the Peugeot 108's front bumper than most people expect: parking sensors, adaptive cruise control radar, and fog light housings are all routinely integrated, complicating what would otherwise be a simple replacement after minor impact damage.

Peugeot 108 Front Bumper: Watch: Replacing It

🎬 Watch: Bumper Removal & Installation - Toyota Aygo - Peugeot 107 - Citroen C1 - Easy 10/15 min Fix

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the clips and fixings can differ slightly on yours.

Peugeot 108 Front Bumper reference plate

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Peugeot 108 Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the 108 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Peugeot 108 Front Bumper: Generations & Colour

All generations (single generation, 2014–2021)	Bianca White, Onyx Black, Vertigo Blue, Purple Rain

Find Peugeot 108 Front Bumper Here!

Opens live listings in a new tab.

Peugeot 108 Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Peugeot Front Bumper

The same part, covered across other Peugeot models.