Peugeot 3008 Front Bumper: Fitment, Sensors & Common Damage

On the 3008, the whole parking sensor system can fail from either one damaged sensor or a damp-prone control module — plus a free click-test to diagnose which.

Illustration for editorial purposes

Find Peugeot 3008 Front Bumper Here!

Opens live listings in a new tab.

Peugeot 3008 Front Bumper: OEM Part Number

Accuracy note: genuinely worth knowing: 3008 bumpers fitted with headlight washer jets, if equipped, need the correct washer nozzle cutouts and the washer fluid line routed through — an otherwise-correct bumper missing this feature on a car that has it will need modification or won't accept the washer system at all.

A Genuinely Important Fact: The Whole System Can Fail From One Sensor, or the Module Itself — Peugeot 3008 Front Bumper

If your entire parking sensor system has stopped working at once — front and rear together, not just one specific sensor — this is genuinely worth knowing: on this platform, if just one individual sensor fails internally, the parking assistance ECU can disable the entire system rather than just losing detection at that one point. Separately, and worth checking directly, the parking assistance ECU module itself (located in the left-hand inner compartment of the boot area) is genuinely prone to failing from damp and water ingress affecting the module directly, rather than any individual sensor being at fault at all. If you're chasing a total system failure, it's worth checking both possibilities rather than assuming it must be one specific sensor.

A genuinely useful, free diagnostic test worth trying first: with the parking sensors switched on, place your ear close to each sensor in turn — a healthy sensor produces an audible clicking sound as it pulses. A sensor that stays silent while the others click confirms which specific one has failed, letting you narrow down the problem before paying for diagnostics. One documented owner used proper Peugeot diagnostic software to correctly identify a single faulty rear sensor this way, then sourced a genuine replacement for around £65 rather than guessing and replacing several sensors unnecessarily.

Peugeot 3008 Front Bumper: More Than Just a Plastic Panel

Even a low-speed knock to the Peugeot 3008's front bumper can be more involved to fix than it looks, since it usually integrates parking sensors, adaptive cruise radar, and fog light housings — all needing attention beyond a plain panel replacement.

Peugeot 3008 Front Bumper reference plate

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Peugeot 3008 Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the 3008 often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Peugeot 3008 Front Bumper: Generations, Derivatives & Colour

Standard trims	Bianca White, Nimbus Grey, Cumulus Grey, Vertigo Blue
Colour-matching note	Pearlescent White can visually resemble the solid Bianca White in photos and low light, leading some buyers to be unsure which shade their car actually has — genuinely worth confirming the paint code before ordering a replacement bumper
GT	Different front bumper with larger air intakes than standard trim

Find Peugeot 3008 Front Bumper Here!

Opens live listings in a new tab.

Peugeot 3008 Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Peugeot Front Bumper

The same part, covered across other Peugeot models.