Toyota C-HR Front Bumper: Fitment, Sensors & Common Damage

On the C-HR, sensors are genuinely wired in series, meaning one faulty link can disable the whole system.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Van Wezel 5417574 / Van Wezel 5411577

Accuracy note: Covers the Toyota C-HR (2016-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Van Wezel 5417574 (primed); Van Wezel 5411577 (primed, with parking sensor holes); Van Wezel 5417575 (primed, with parking sensor holes)
Splitters, outer sections & trims	Prasco TY7021001 (primed, with parking sensor holes, upper section); Van Wezel 5411576 (with fog light holes, lower section)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A Genuinely Important Technical Fact Worth Knowing First — Toyota C-HR Front Bumper

If the entire parking sensor system has stopped working rather than just one sensor, this is genuinely worth knowing: parking sensors on many Toyota models are wired in series, meaning a single faulty sensor or damaged wire can disable the whole system rather than just the affected sensor. It's worth methodically checking each sensor individually rather than assuming all have failed simultaneously.

A genuinely real, distinctive consumer grievance worth knowing about: one documented case saw a routine car wash trigger a "Parking Sensor Malfunction" warning immediately afterward, with the dealer refusing warranty coverage and blaming the car wash itself. If you experience this right after a wash, it's genuinely worth trying isopropyl alcohol on each sensor and allowing the car to fully dry before accepting a paid diagnosis.

It's also worth knowing that even a correct, genuine replacement sensor typically needs proper calibration through dealer-level diagnostic equipment before it works correctly — simply plugging in a new sensor isn't always enough.

Toyota C-HR Front Bumper: More Than Just a Plastic Panel

The Toyota C-HR's front bumper routinely integrates parking sensors, adaptive cruise control radar, and fog light housings, which means replacing it after even minor impact damage often involves more than a straightforward swap.

Toyota C-HR Front Bumper: Watch: Replacing It

🎬 Watch: Как да сваля предна броня на Toyota C-HR 2023

Watch on YouTube ↗

This one is narrated in another language, but the steps on screen are the same job.

Toyota C-HR Front Bumper reference plate

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Toyota C-HR Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the C-HR often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Toyota C-HR Front Bumper: Generations, Derivatives & Colour

Standard trims	Super White, Black, Silver Metallic, Ash Grey — many colours available as bi-tone with a contrast black roof
GR Sport	Ash Grey with a black roof is genuinely exclusive to this trim; comes with a Piano Black finish to the centre bumper and fog lamp surrounds, plus a bespoke, more aggressive front spoiler not fitted to standard trims

Find Toyota C-HR Front Bumper Here!

Opens live listings in a new tab.

Toyota C-HR Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Toyota Front Bumper

The same part, covered across other Toyota models.