Toyota Prius Front Bumper: Fitment, Sensors & Common Damage

On the Prius, sensors are genuinely wired in series, meaning one faulty link can disable the whole system.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — front bumper (aftermarket) Prasco TY4261001 / Van Wezel 5460575

Accuracy note: Covers the Toyota Prius (2016-) as listed in the UK aftermarket catalogues. A front bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, trim, facelift date and the holes moulded into it for parking sensors, fog lights, headlamp washers or a tow eye cover. A cover without the right holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The splitters, outer sections and trims listed separately are the parts most often sold on their own after a car-park knock.

Front bumper covers (aftermarket)	Prasco TY4261001; Prasco TY4261011 (with parking sensor holes); Van Wezel 5460575 (primed, with parking sensor holes); Diederichs 6637051 (with parking sensor holes); Diederichs 6637050
Splitters, outer sections & trims	Prasco TY4281104 (primed, with parking sensor holes); Prasco TY4281103 (primed, with parking sensor holes)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, trim, parking sensors and fog lights, so order it against your VIN
Fitment notes	Match body style, trim, facelift date and the holes for parking sensors, fog lights and washer jets; covers come primed and need painting to your paint code before fitting.

A Genuinely Important Technical Fact Worth Knowing First — Toyota Prius Front Bumper

If the entire parking sensor system has stopped working rather than just one sensor, this is genuinely worth knowing: parking sensors on many Toyota models are wired in series, meaning a single faulty sensor or damaged wire can disable the whole system rather than just the affected sensor. It's worth methodically checking each sensor individually rather than assuming all have failed simultaneously.

A genuinely real, distinctive consumer grievance worth knowing about: one documented case saw a routine car wash trigger a "Parking Sensor Malfunction" warning immediately afterward, with the dealer refusing warranty coverage and blaming the car wash itself. If you experience this right after a wash, it's genuinely worth trying isopropyl alcohol on each sensor and allowing the car to fully dry before accepting a paid diagnosis.

It's also worth knowing that even a correct, genuine replacement sensor typically needs proper calibration through dealer-level diagnostic equipment before it works correctly — simply plugging in a new sensor isn't always enough.

Toyota Prius Front Bumper: More Than Just a Plastic Panel

The Toyota Prius's front bumper routinely integrates parking sensors, adaptive cruise control radar, and fog light housings, which means replacing it after even minor impact damage often involves more than a straightforward swap.

Toyota Prius Front Bumper: Watch: Replacing It

🎬 Watch: How to remove a 4th Gen Toyota Prius Front Bumper 2016-2022

Watch on YouTube ↗

Toyota Prius Front Bumper reference plate

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts, radar mounting points and fog light provisions. Always confirm against your VIN before ordering.

Toyota Prius Front Bumper: What It Does

Beyond absorbing minor impacts, the front bumper on higher trims of the Prius often houses parking sensors, the radar sensor used for adaptive cruise control, and fog lights. A bumper that looks compatible can still be missing the correct cutouts or mounting provisions for your specific trim's equipment.

Toyota Prius Front Bumper: Generations & Colour

All generations	Super White, Attitude Black, Silver Metallic, Emotional Red
Persona special editions (2013/2015)	Genuinely exclusive colours reserved for these limited runs — Black Cherry Pearl (2013) and Absolutely Red (2015) were not offered on any standard Prius

Find Toyota Prius Front Bumper Here!

Opens live listings in a new tab.

Toyota Prius Front Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Front Bumper Guide for common damage types to check for, confirming fitment against your VIN, and the sensor-calibration risk with cheap aftermarket covers.

More Toyota Front Bumper

The same part, covered across other Toyota models.