Mitsubishi ASX Brake Discs: Specs, Fitment & Wear Symptoms
A genuinely important habit worth building: Mitsubishi has faced multiple confirmed recalls on related models addressing corrosion in brake-related components.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — front discs (aftermarket) Brembo 09.N264.11 / Bosch 0 986 479 745
| Front brake discs (aftermarket) | Brembo 09.N264.11 (294 x 26 mm, vented, 5 holes, coated, minimum thickness 24.4 mm); Bosch 0 986 479 745 (294 x 26 mm, vented, 5 holes, coated high-carbon, minimum thickness 24.4 mm); Bosch 0 986 479 751 (294 x 26 mm, vented, 5 holes, oiled, minimum thickness 24.4 mm); ATE 24.0126-0170.1 (294 x 26 mm, vented, 5 holes, coated, minimum thickness 24.4 mm); TRW DF6206 (294 x 26 mm, vented, 5 holes, painted, minimum thickness 24.4 mm); TRW DF6174 (294 x 24 mm, vented, 5 holes, painted, the thinner 24 mm disc); febi 108436 (294 x 26 mm, vented, 5 holes, coated, minimum thickness 24.4 mm) |
|---|---|
| Disc sizes & variants | All front discs are 294 mm in diameter. Two thicknesses are listed: 26 mm (the usual fitment, carried by Brembo, Bosch, ATE, febi and TRW DF6206) and 24 mm (TRW DF6174, Ridex 82B0154, Stark SKBD-0020158, with the Ridex and Stark 24 mm parts restricted to cars built up to November 2016). |
| Genuine (OE) numbers quoted | None quoted in catalogue listings — order genuine discs against your VIN |
| Fitment notes | The 24 mm front discs apply to earlier cars (built up to 2016/11) where that restriction is given, so check thickness of the existing disc before ordering; minimum thickness for the 26 mm disc is 24.4 mm. |
Mitsubishi ASX Brake Discs: The Part That Pads Depend On
On the Mitsubishi ASX, discs and pads don't wear independently — neglect one and the other degrades faster too, which is exactly why what starts as a routine pad change frequently turns into a disc replacement as well.
Mitsubishi ASX Brake Discs: Watch: Replacing It
Croatian; only English ASX videos found were pads only
Mitsubishi ASX Brake Discs: What They Do
Brake discs provide the surface the brake pads clamp against to slow the car, converting momentum into heat through friction. Larger, sportier trims of the ASX typically use bigger discs than standard versions to handle the additional heat generated by more aggressive braking.
Opens live listings in a new tab.
A Genuinely Important Habit Worth Building: Checking for Open Recalls — Mitsubishi ASX Brake Discs
Mitsubishi has faced multiple confirmed recalls on related models specifically addressing corrosion in brake-related components, including parking brake shafts and caliper boots not being properly water-sealed, traced back to a UK dealer's original field report about rear brake disintegration. It's genuinely worth checking your specific VIN against Mitsubishi's official recall register directly, particularly on a used car where you can't be certain a previous owner had any relevant recall work completed.
It's also genuinely worth knowing that a burning smell alongside noticeably hot wheels after releasing the parking brake can indicate a seized, corroded rear caliper rubbing against the disc — worth having this checked promptly.
Mitsubishi ASX Brake Discs: Wear Symptoms, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Brake Discs Guide for warning signs to watch for, confirming fitment against your VIN, and choosing a reliable aftermarket disc.
More Mitsubishi Brake Discs
The same part, covered across other Mitsubishi models.