Nissan Juke Rear Bumper: Fitment, Sensors & Common Damage

On the Juke, a genuinely specific failure point on related models: the camera wire commonly snaps at the boot-to-body flex point.

Illustration for editorial purposes

Find Nissan Juke Rear Bumper Here!

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco DS7021051 / Diederichs 6075155

Accuracy note: Covers the Nissan Juke (F15 2010-2019) as listed in the UK aftermarket catalogues. A rear bumper is a body-coloured plastic skin, so what you buy is a primed cover that still needs painting to your paint code, and the right one depends on body style, facelift date and the holes moulded into it for parking sensors, a tow bar cut-out or exhaust trims — a cover without the sensor holes cannot be drilled accurately at home. The references below are UK aftermarket catalogue listings for this generation, labelled by brand with the fitment details the catalogue gives; carmakers rarely publish the genuine number against these, so order a genuine cover against your VIN if you want a guaranteed match. The lower sections, corner pieces and trims listed separately are the parts most often sold on their own after a car-park knock.

Rear bumper covers (aftermarket)	Prasco DS7021051 (Rear, primed); Diederichs 6075155 (Rear, for vehicles without parking sensors, Smooth, for facelift); Nissan H5022BV8MH (Rear)
Lower sections, corners & trims	Prasco DS7021071 (Rear, Colour: black, Section: Lower Section)
Genuine (OE) numbers quoted	None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN
Fitment notes	Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting.

A Genuinely Specific, Real Failure Point Worth Checking First — Nissan Juke Rear Bumper

If your reversing camera has stopped working suddenly, this is genuinely worth checking: the wire connecting the camera runs through a rubber pipe or grommet at the point between the boot lid or tailgate and the main body — a location that flexes every time the boot is opened and closed. Over time, this is a well-documented point where the wire can genuinely snap from fatigue. Checking this specific spot and splicing in a new section has resolved this fault directly in documented cases.

A genuinely frustrating, real fuse-labelling trap worth knowing about: one documented case on a related model found the correct fuse labelled incorrectly both on the fuse box lid itself and in the official wiring diagram — neither label mentioned the reversing camera or lights at all. If you're struggling to identify the correct fuse from official documentation, it's worth knowing the labelling itself may simply be wrong.

It's also genuinely worth knowing that the Body Control Module on related platforms can only be properly reset using Nissan's proprietary Consult diagnostic software — disconnecting the battery genuinely does nothing to reset it.

Nissan Juke Rear Bumper: More Than Just a Plastic Panel

The Nissan Juke's rear bumper carries more hardware than older cars used to — parking sensors, a reversing camera housing, occasionally exhaust trim finishers — which is exactly why even a minor kerb knock can mean more than just ordering a replacement panel.

Nissan Juke Rear Bumper: Watch: Replacing It

🎬 Watch: How to remove a 2018 or any Nissan Juke back bumper...

Watch on YouTube ↗

2018 = F15 facelift

Before you buy: bumper specification varies significantly by trim, particularly around parking sensor cutouts and camera housings. Always confirm against your VIN before ordering.

Nissan Juke Rear Bumper: What It Does

Beyond absorbing minor impacts, the rear bumper on higher trims of the Juke often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.

Nissan Juke Rear Bumper: Generations, Derivatives & Colour

F15 (2010–2019), standard trims	Ivory Pearl, Pearl Black, Magnetic Red, Arctic White
F15 Nismo/Nismo RS	Deliberately limited to just Pearl White, Sapphire/Super Black, and Brilliant Silver — genuinely narrower than the standard range; the rear bumper is also styled differently on this trim
F16 (2019–present), standard trims	Storm White, Ceramic Grey, Fuji Sunset Red, Gun Metallic

Find Nissan Juke Rear Bumper Here!

Opens live listings in a new tab.

Nissan Juke Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.

More Nissan Rear Bumper

The same part, covered across other Nissan models.