Nissan Qashqai Rear Bumper: Fitment, Sensors & Common Damage
A genuinely specific failure point: the camera wire commonly snaps at the boot-to-body flex point — plus a genuinely frustrating real case of a fuse mislabeled on both the box and the wiring diagram.
Illustration for editorial purposes
Opens live listings in a new tab.
OEM Part Number: confirm via VIN — rear bumper (aftermarket) Prasco DS7131051 / Van Wezel 3391540
| Rear bumper covers (aftermarket) | Prasco DS7131051 (Rear, Colour: black, Smooth, with holes for park assist); Prasco DS7131060 (Rear, Colour: black, with holes for parking sensors); Prasco DS7131050 (Rear, Colour: black, for vehicles with park assist, Smooth); Van Wezel 3391540 (Rear, Colour: black, for vehicles without parking sensors, Smooth, without holes for parking sensors, with holes for towing hook); Van Wezel 3391541 (Rear, Colour: black, Smooth, with holes for parking sensors, with holes for towing hook); Van Wezel 3356542 (Rear, primed, without holes for parking sensors, without holes for trim/protective strip) |
|---|---|
| Lower sections, corners & trims | None listed separately |
| Genuine (OE) numbers quoted | None quoted in the catalogue listings — the genuine cover varies by body style, parking sensors and tow bar, so order it against your VIN |
| Fitment notes | Match body style, facelift date and the holes for parking sensors or exhaust trims; covers come primed and need painting to your paint code before fitting. |
A Genuinely Specific, Real Failure Point Worth Checking First — Nissan Qashqai Rear Bumper
If your reversing camera has stopped working suddenly, this is genuinely worth checking before assuming a more complex fault: the wire connecting the camera runs through a rubber pipe or grommet at the point between the boot lid or tailgate and the main body — a specific location that flexes every single time the boot is opened and closed. Over time and repeated cycles, this is a well-documented point where the wire can genuinely snap from fatigue. Checking this specific spot for a break, and simply splicing in a new section if found, has resolved this fault directly in documented cases without needing to replace the camera or any other component.
It's also genuinely worth knowing that the Body Control Module on this platform can only be properly reset using Nissan's proprietary Consult diagnostic software — disconnecting the battery, a commonly tried generic fix for many electrical gremlins, genuinely does nothing to reset it on this specific system. If you're chasing a camera or reversing light fault and have tried a battery disconnect expecting it to help, it's worth knowing this particular reset method won't work here, saving you the trouble of trying it again.
Nissan Qashqai Rear Bumper: More Than Just a Plastic Panel
Kerb damage to the Nissan Qashqai's rear bumper is common, but the repair often isn't as simple as it looks: it houses parking sensors, a reversing camera, and sometimes exhaust trim finishers, all of which complicate what would otherwise be a straightforward panel replacement.
Nissan Qashqai Rear Bumper: Watch: Replacing It
The sequence is much the same on this generation: wheel-arch liner screws, the fixings along the boot aperture and under the lower edge, then unclip each corner from the wing and unplug any sensor loom before the cover comes away.
Nissan Qashqai Rear Bumper: What It Does
Beyond absorbing minor impacts, the rear bumper on higher trims of the Qashqai often houses parking sensors, a reversing camera, and sometimes integrated exhaust finishers. A bumper that looks compatible can still be missing the correct cutouts or wiring provisions for your specific trim's equipment.
Nissan Qashqai Rear Bumper: Generations, Derivatives & Colour
| J10 (2006–2013), standard trims | Colour-coded to body — common shades included Pearl White, Gun Metallic, Magnetic Red |
|---|---|
| J11 (2013–2017), standard trims | Colour-coded to body — common shades included Pearl Black, Gun Metallic, Magnetic Red |
| J11B facelift (2017–2021), standard trims | Colour-coded to body — common shades included Vivid Blue, Pearl Black, Ceramic Grey; revised lighting and lower bumper than pre-facelift |
| J12 (2021–present), standard trims | Colour-coded to body — common shades included Pearl Black, Magnetic Blue, Ceramic Grey |
Opens live listings in a new tab.
Match your paint colour by shade name (not just "red" or "blue" generically) when buying a used colour-coded bumper — Nissan has offered several distinct reds (Magnetic Red, "New Red") and blues across generations that don't match each other. Your colour and paint code are on the driver's door jamb sticker alongside the VIN.
Nissan Qashqai Rear Bumper: Common Damage, DIY Difficulty & Aftermarket Advice
These are the same regardless of make or model — see our full Rear Bumper Guide for common damage types, confirming fitment (body style and sensor equipment matter here), and OEM vs aftermarket guidance.
More Nissan Rear Bumper
The same part, covered across other Nissan models.