Renault Captur Engine Mount: Specs, Fitment & Common Faults

On the Captur, a worn mount can genuinely be an effect of an underlying rough-running engine, not the original cause.

Illustration for editorial purposes

Opens live listings in a new tab.

OEM Part Number: confirm via VIN — engine mount (aftermarket) Corteco 49190151 / Mapco 36373

Accuracy note: Covers the Renault Captur (2013-2019) as listed in the UK aftermarket catalogues. Engine mounts are sold by position (left, right, front, rear, upper, lower), and the right one depends on the engine, the gearbox (manual, automatic or dual-clutch) and the trim. The references below are examples from the UK aftermarket catalogue for the engines checked on this generation, so match your own engine code and gearbox before ordering; the carmaker's own numbers are not quoted in those listings, so check the genuine mount against your VIN if you want a guaranteed match.

Engine Mount — Rear (aftermarket)	Maxgear 40-0707, Mapco 36373
Engine Mount — Front rear lower (aftermarket)	Original Imperium 31683, Kavo EEM-10001
Engine Mount — Front (aftermarket)	Corteco 49190151 (manual)
Genuine (OE) number	Not quoted in the catalogue listings — mounts differ by engine and gearbox, so order the genuine ones against your VIN
Fitment notes	The listing above shows examples for the engines checked; petrol, diesel, manual and automatic versions often use different mounts, and cars usually have more than one mount.

A Genuinely Sophisticated Insight: A Worn Mount Can Be an Effect, Not a Cause — Renault Captur Engine Mount

Before replacing mounts, it's genuinely worth considering something counter-intuitive: worn engine mounts aren't always the original cause of vibration — sometimes they're the effect of it. If the engine itself isn't running perfectly smoothly (an underlying misfire, ignition fault, or rough idle), this excess vibration transmitted through the mounts over time can accelerate their wear, meaning you could replace the mounts, only for them to wear out again quickly if the actual root cause was never addressed. If your idle isn't genuinely smooth and steady, it's worth investigating why before assuming worn mounts are the whole story.

A genuinely useful, practical visual test worth trying: with the handbrake firmly applied and first gear selected, slowly let the clutch out until just before the point the engine would stall, while someone else watches the engine from a safe distance for visible movement or a clunk — repeat this in reverse gear too. Genuine excess movement or a clunk at this point points toward a worn mount rather than another cause.

It's also worth knowing this is a genuinely well-documented, persistent issue on dCi diesel models specifically — one owner described it directly as "the engine mount problem that plagues numerous Clio dCi owners," with dealers reportedly aware of the issue but struggling to find a lasting fix even after repeated attempts. If you're facing repeat mount failures on a dCi engine despite proper replacement, you're likely not alone.

Renault Captur Engine Mount: Watch: Replacing It

🎬 Watch: How to Replace Right Engine Mount - Sandero 2, Logan 2 (Dacia, Renault)

Watch on YouTube ↗

This video shows a closely related car on the same platform, so the mount positions and fixings can differ slightly on yours.

Renault Captur Engine Mount reference plate

Renault Captur Engine Mount: What It Does

Engine mounts secure the engine and transmission to the chassis while absorbing vibration and movement, preventing that vibration from transferring directly into the cabin. Most versions of the Captur use several mounts working together — typically at least one on each side of the engine plus a torque mount — and a single failed mount can throw off the whole assembly's balance.

Find Renault Captur Engine Mount Here!

Opens live listings in a new tab.

Renault Captur Engine Mount: Symptoms, DIY Difficulty & Aftermarket Advice

These are the same regardless of make or model — see our full Engine Mount Guide for warning signs to watch for (including some genuinely make-specific quirks in how they show up), confirming fitment against your VIN, and which aftermarket approach is worth trusting.

More Renault Engine Mount

The same part, covered across other Renault models.